• Variable wattage: 7W-160W
• Temperature control range: 100-315′C(200-600′F)
• Temperature Control TC supports: Ni / Ti / SS / NiCr
• Compatible with 0.05 – 3ohm resistance atomizer
• 510 threading connection
• Micro-USB charging port
• Houses dual 18650 batteries (batteries not included )

IT INCLUDES

•  One Kangertech Kbox 160W mod box
• Gift Box
•  User Manual

COMPATIBILITY

Triton 2 Tank system,

Aspire Asthos Tank – Coming Soon

RECOMMENDATIONS

We recommend to start using the Kangertech Kbox 160W at 6-7 watts maximum when using a new tank or a new coil head. Take minimum 20 puff before you start incrementing the wattage progressively by 1 watt, to a maximum 13 watts depending on your tank system.

WARNINGS

• Do not charge your electronic cigarettes or MOD with chargers different from the ones supplied with your kit and an Electrical safety approved charger “Soulblu Wall Charger”. Alternatively you can use Soulblu Car charger connected to provided chargers with the kit.

• Clean (dry) the threaded fitting of your MOD every time you recharge your batteries, to avoid shortage.

• Make sure your Tank system, or clearomiser doesn’t leak eliquid into the fitting of the MOD *(Follow instruction on how to use the tank or clearomiser properly to avoid leakage.

• Keep Electronic cigarettes, Vaporisers, MOD Boxes and eliquids away from high temperatures.

• Please don’t keep your vaporisers inside your pockets, as they might become too hot and become a fire hazard.

• Do not dropping your Electronic cigarettes, Vaporisers and MODs.

• Keep out of reach of children.

• Always carry batteries in a battery case, do not carry or store them loose or near metallic objects.

• Always keep your batteries dry and away from water.

• Never expose your batteries to an open flame.

• Visually inspect your batteries regularly. If the wrapper is damaged in any way DO NOT USE IT. It is important to either replace the battery or take the battery to a shop to have it re-wrapped or replaced.

• Do not overcharge or over discharge your batteries. If a battery has been over charged/discharged DO NOT USE IT and properly discard it.

• Do not charge your batteries unattended or while sleeping.

• Check on charging batteries periodically (recommended every 30 min) and promptly remove them from the charger as soon as they finished charging.

• Do not expose your battery extreme temperatures both heat and cold.

The post Kangertech Kbox 160 W Temperature control BUNDLED appeared first on Soulblu Nicotine e-liquid & Vapes.

The Joyetech Cuboid Pro is packed full of features, including; a responsive touch screen, well designed UI, easy-to-go interface, tap button, vibration motor, 2A quick charge, multi-protections, power bank, preheat, real-time clock, custom wallpaper.

The 2.4inch touchscreen is intuitive and easy to use. Quickly change your settings and view your custom screensaver. Stay healthy with the built in pedometer that tracks your daily activity.

As well as your conventional firing button, the Cuboid Pro features TAPTEC™ technology that uses micro voltage signal gestures to detect your touch. Providing vibration feedback each time you press, this is a new way to fire your Cuboid Pro.

The dual removable 18650 batteries will fire your Joyetech Cuboid Pro up to 200W. Supporting quick charging, you can use the on-board USB port to update your firmware or charge your batteries.

Product Specifications:

•  Dimensions: 3-5/16″ x 2-1/8″ x 1-1/8″
• Comfortably Fits 25mm and Smaller Tanks
•  New Flexible 510 Contact Pin (4mm to 5.5mm)
•  Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
•  Output Wattage: 1 – 200W
• Temperature Control Range: 100 – 315C / 200 – 600F
•  Resistance Range: 0.05 – 1.5ohm (TC),  0.1 – 3.5ohm (VW)
•  Preheat Function, Stealth Function
•  Pedometer Function, Puff Counter
• Real Time Clock, Custom Wallpaper
•  2.4″ TFT Color Display Screen
• Capacitive Touchscreen with Vibration Motor Feedback
•  Micro USB Port for Firmware Updates and Charging
• Maximum Charging Current: 2A
• Flip Open Battery Door Cover
•  Dual Circuit Protection

The post Joyetech Cuboid Pro Touch Screen BUNDLED KIT appeared first on Soulblu Nicotine e-liquid & Vapes.

The LED belt wraps around the large 0.96 inch colour display and users have the ability to choose from six colours and decide if you want your device to light up when fired or at all the time. The Sigelei Kaos Spectrum requires 2 x 18650 batteries and supports Nickel, Titanium and Stainless Steel 304,316,317 coils in TC Mode.

Product Specification 

• Wattage Range: 10W – 230W
•  Temperature Range: 200°F – 570°F / 100°C – 300°C
• Temperature Control: Nickel (Ni200), Titanium (Ti), Stainless Steel 304, 316, 317 (SS), TCR
• Resistance Range: 0.1 – 3.0ohm
•  0.96″ TFT Color Display Screen
•  Interchangeable and Customizable LED Colour Settings
•  Preheat Functionality
•  Fast and Balanced Charging Support
•  Micro USB Port (Charging & Upgrading)
•  Requires 2x 18650 Batteries.

The post Sigelei Kaos Spectrum 230W BUNDLED KIT appeared first on Soulblu Nicotine e-liquid & Vapes.

Speedy Mini 50W Temperature Control box mod

•   Material: Zinc alloy and rubber paint in the surface
•   2 modes adjustable: Joule and power mode
•   Variable wattage: 5 – 50W
•   Variable Joule: 2.5 – 20J
•   Temperature control: 200 – 600F / 100 – 300
•   Normal atomizer resistance: 0.2 – 3ohm
•   Pure nickel 200 or Ti coil atomizer resistance: 0.1 – 1.0ohm
•   Built-in 1500mAh battery ( 20A )
•   510 spring loaded threading connection
•  Size: 34 x 24 x 65mm

COMPATIBILITY

Soulblu Speedy mod works really well with all Aspire range of tanks, including:

Aspire Nautilus Mini Tanks,

Aspire Triton mini,

Aspire Triton 2 tank

RECOMMENDATIONS

Soulblu Speedy 50w works well with Aspire Nautilus mini tank, but if you are looking to utilise its maximum 50W capacity, you might want to use a more powerful tank like the  Aspire Triton II tank.

You must prime the tank/coil prior to using it the first time: start vaping at low wattage (7watts). Take minimum 20 puff before you start incrementing the wattage progressively by 1 watt, to a maximum 13 watts depending on the coil resistance.

WARNINGS

• Do not charge your electronic cigarettes or MOD with chargers different from the ones supplied with your kit and an Electrical safety approved charger “Soulblu Wall Charger”. Alternatively you can use Soulblu Car charger connected to provided chargers with the kit.
• Clean (dry) the threaded fitting of your MOD every time you recharge your batteries, to avoid shortage.
• Make sure your Tank system, or clearomiser doesn’t leak eliquid into the fitting of the MOD (Follow instruction on how to use the tank / clearomiser properly to avoid leakage.
• Keep Electronic cigarettes, Vaporisers, MOD Boxes and eliquids away from high temperatures.
• Please don’t keep your vaporisers inside your pockets, as they might become too hot and become a fire hazard.
• Do not dropping your Electronic cigarettes, Vaporisers and MODs.
• Keep out of reach of children.
• Always carry batteries in a battery case, do not carry or store them loose or near metallic objects.
• Always keep your batteries dry and away from water.
• Never expose your batteries to an open flame.
• Visually inspect your batteries regularly. If the wrapper is damaged in any way DO NOT USE IT. It is important to either replace the battery or take the battery to a shop to have it re-wrapped or replaced.
• Do not overcharge or over discharge your batteries. If a battery has been over charged/discharged DO NOT USE IT and properly discard it.
• Do not charge your batteries unattended or while sleeping.
• Check on charging batteries periodically (recommended every 30 min) and promptly remove them from the charger as soon as they finished charging.
• Do not expose your battery extreme temperatures both heat and cold.

The post Soulblu Speedy 50 Watt mod BUNDLED appeared first on Soulblu Nicotine e-liquid & Vapes.

Features

• 1. Interchangeable 18650/ 26650 Cell
• 2. 80W Max output
• 3. VW/Bypass/TC-Ni/TC-Ti/TCR Mode
• 4. Multiple protection
• 5. Easy-to-read OLED

Parameters

Eleaf iStick Pico Mega Mod

• Size: 73.5mm x 53.5mm x 31.5mm
• Thread type: 510 thread
• Cell type: High-rate 18650 Cell/ 26650 Cell
• Output mode: VW/ Bypass/ TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
• Output wattage: 1- 80W
• Resistance range: 0.1-3.5ohm (VW/Bypass mode), 0.05ohm-1.5ohm (TC mode)
• Temperature range: 100315/200600 (TC modes)

Parameters

• Length:76.2mm
• Diameter:22mm
• Liquid Capacity:3.8ml
• Rated Resistance Range:0.3ohm

 Video

The post Eleaf iStick Pico Mega 100W BUNDLED KIT appeared first on Soulblu Nicotine e-liquid & Vapes.

• Wattage is variable from 5w to 100w
• Controllable temperature from 140′C-315′C / 280′F-600′F
• Atomizer is suitable at 0.15 to 5 ohm
• Great circuit with negotiable settings (VW, 3VT, TCR, BYPASS, CW, CT)
• For each mechanical mod Bypass mode functions are available
• Made of Aluminium Alloy and Zinc Alloy
• Current standby <50
• Range of voltage 0 to 8.5V
• Display in OLED screen
• Connected through 510 threading.

The post Vaporesso Nebula 100W BUNDLED KIT appeared first on Soulblu Nicotine e-liquid & Vapes.

• Wattage is variable from 5w to 100w
• Controllable temperature from 140′C-315′C / 280′F-600′F
• Atomizer is suitable at 0.15 to 5 ohm
• Great circuit with negotiable settings (VW, 3VT, TCR, BYPASS, CW, CT)
• For each mechanical mod Bypass mode functions are available
• Made of Aluminium Alloy and Zinc Alloy
• Current standby <50
• Range of voltage 0 to 8.5V
• Display in OLED screen
• Connected through 510 threading
• Single 26650 or 18650 batteries are compatible (Not included)

The post Vaporesso Nebula 100W appeared first on Soulblu Nicotine e-liquid & Vapes.

The Joyetech Cuboid Pro is packed full of features, including; a responsive touch screen, well designed UI, easy-to-go interface, tap button, vibration motor, 2A quick charge, multi-protections, power bank, preheat, real-time clock, custom wallpaper.

The 2.4inch touchscreen is intuitive and easy to use. Quickly change your settings and view your custom screensaver. Stay healthy with the built in pedometer that tracks your daily activity.

As well as your conventional firing button, the Cuboid Pro features TAPTEC™ technology that uses micro voltage signal gestures to detect your touch. Providing vibration feedback each time you press, this is a new way to fire your Cuboid Pro.

The dual removable 18650 batteries will fire your Joyetech Cuboid Pro up to 200W. Supporting quick charging, you can use the on-board USB port to update your firmware or charge your batteries.

Product Specifications:

•  Dimensions: 3-5/16″ x 2-1/8″ x 1-1/8″
• Comfortably Fits 25mm and Smaller Tanks
•  New Flexible 510 Contact Pin (4mm to 5.5mm)
•  Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
•  Output Wattage: 1 – 200W
• Temperature Control Range: 100 – 315C / 200 – 600F
•  Resistance Range: 0.05 – 1.5ohm (TC),  0.1 – 3.5ohm (VW)
•  Preheat Function, Stealth Function
•  Pedometer Function, Puff Counter
• Real Time Clock, Custom Wallpaper
•  2.4″ TFT Color Display Screen
• Capacitive Touchscreen with Vibration Motor Feedback
•  Micro USB Port for Firmware Updates and Charging
• Maximum Charging Current: 2A
• Flip Open Battery Door Cover
•  Dual Circuit Protection

The post Joyetech Cuboid Pro Touch Screen MOD appeared first on Soulblu Nicotine e-liquid & Vapes.

• Parameters of Istick Pico Mega 100W Mod
• Size: 73.5 mm x 53.5mm x 31.5mm
• Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3)
• Wattage: 1 – 100W
• Temperature range: 100-315℃/200-600℉
• Resistance range: 0.1-3.5ohm (VW/Bypass mode);0.05-1.5ohm (TC modes)
• Battery: High rate 18650 battery / 26650 battery – NOT Included –

Features

• 100W Max Output
• VW/Bypass/TC-Ni/TC-Ti/TCR Mode
• Replaceable 18650 Cell/ 26650 cell
• Elegant appearance in 5 colors
• Upgrade-able firmware

The post Eleaf iStick Pico Mega 100W appeared first on Soulblu Nicotine e-liquid & Vapes.

The LED belt wraps around the large 0.96 inch colour display and users have the ability to choose from six colours and decide if you want your device to light up when fired or at all the time. The Kaos Spectrum requires 2 x 18650 batteries and supports Nickel, Titanium and Stainless Steel 304,316,317 coils in TC Mode.

Product Specification 

• Wattage Range: 10W – 230W
• Temperature Range: 200°F – 570°F / 100°C – 300°C
• Temperature Control: Nickel (Ni200), Titanium (Ti), Stainless Steel 304, 316, 317 (SS), TCR
• Resistance Range: 0.1 – 3.0ohm
• 0.96″ TFT Color Display Screen
• Interchangeable and Customizable LED Colour Settings
• Preheat Functionality
• Fast and Balanced Charging Support
• Micro USB Port (Charging & Upgrading)
• Requires 2x 18650 Batteries (Sold separately).

The post Sigelei Kaos Spectrum 230W appeared first on Soulblu Nicotine e-liquid & Vapes.